Zero CO2
Omega
Omega Water Pump

OMEGA Series

Main Features
Built-in MPPT solar charger.
Supports single phase or three-phase asynchronous motor depending on models.
Supports single phase AC input when PV energy is not sufficient (only for Omega 2.2KW LS model).
Built-in full protection and self-diagnosis.
Soft start function prevents water hammer effect and extends system lifecycle.
Comprehensive LEDs and display screen for real-time system status.
Remote monitoring through RS-485.
Optional remote panel available.

Specifications

MODEL Omega 2.2KW LS Omega 2.2KW Omega 7.5KW Omega 11KW Omega 15KW
DATA SHEET
USER MANUAL
Rated Output Power 2200 W (3 HP)
(supports 0.75 ~ 3 HP water pump)
7500 W (10 HP)
(supports 3 ~ 10 HP
water pump)
11000 W (15 HP)
(supports 10 ~ 15 HP
water pump)
15000 W (20 HP)
PV
INPUT
(DC)
Nominal DC Voltage / Maximum DC Voltage 320 VDC / 450 VDC 540 VDC / 800 VDC 800 VDC
Start-up Voltage 120 VDC 250 VDC
MPP Voltage Range 120 ~ 420 VDC 250 ~ 780 VDC 500 ~ 600 VDC
Maximum PV Current 6 A 16 A 24 A 32 A
Number of MPP Trackers 1
AC
INPUT
Input Voltage 220 / 230 / 240 VAC
(-15% ~ +10%)
N / A  
Input Frequency 47 Hz ~ 63 Hz N / A  
OUTPUT Nominal Voltage 220 / 230 / 240 VAC 3 x 380 / 400 / 415 / 440 VAC
Efficiency > 97%
Nominal Output Current 14 A 10 A 5.0 A 15 A 22 A 29 A
Motor Type Single-phase
motor
Three-phase
asynchronous
motor
Three-phase asynchronous motor
Frequency Precision ±0.2%
PROTECTION Full Protection Phase lost, dry pumping, motor locked, weak sunlight, over-voltage, under-voltage, over-current, surge,
over-temperature and short circuit protection
PHYSICAL Dimensions, (D x W x H) 110 x 230 x 342 mm 205 x 218 x 320 mm
Net Weight 5 kg 5.5 kg 6 kg 6.5 kg 6 kg
IP Protection IP20
INTERFACE Communication Port RS-232 / RS-485
ENVIRONMENT Humidity < 95% RH (Non-condensing)
Operating Temperature -20°C ~ 45°C at 100% full load, 46°C ~ 60°C power derating

Product specifications are subject to change without further notice.