Zero CO2

Omega X v2

Omega X v2
Omega X v2

OMEGA X v2 Series

Main Features
Zero (0ms) transfer time to protect mission-critical loads such as servers and ATMs.
High PV input voltage range.
Removable LCD control module with multiple communications.
Selectable high power charging current.
Built-in Wi-Fi for mobile monitoring (App is available).
Configurable AC/Solar input priority via LCD setting.
Reserved communication port for BMS (RS485 or CAN-BUS).
Parallel operation up to 9 units.

SOLUTIONS

+THINK +CONSTRUCT

Specifications

MODEL Omega X v2 5K-48 Omega X v2 6K-48
DATA SHEET
Rated Power 5000 VA / 5000 W 6000 VA / 6000 W
Parallel Capability Up to 9 units
GRID INPUT
Voltage 230 VAC
Voltage Range 110 - 280 VAC
Frequency Range 50 Hz / 60 Hz (Auto sensing) ± 4 Hz
Power Factor ≥ 0.98 @ Nominal Voltage (100% Load)
THDi ≤ 10%
LOAD OUTPUT
AC Voltage Regulation (Line&Batt. Mode) 230 VAC ± 5%
Frequency Range (Synchronized Range) 46 ~ 54 Hz or 56 ~ 64 Hz
Frequency Range (Batt. Mode) 50 Hz ± 0.1 Hz or 60 Hz ± 0.1 Hz
Harmonic Distortion ≤ 3% THD (Linear Load); ≤ 5% THD (Non-linear Load)
Transfer Time AC Mode to Batt. Mode 0 ms
Inverter to Bypass 4 ms (Typical)
Waveform Pure sine wave
No Load Consumption 40 W 75 W
EFFICIENCY
Line Mode 94%
ECO Mode 98%
Battery Mode 92%
BATTERY
Battery Voltage 40 ~ 66 VDC
Floating Charge Voltage 54 VDC
Overcharge Protection 66 VDC
SOLAR INPUT
Solar Charger Type MPPT
Maximum PV Array Power 6000 W
MPPT Range @ Operating Voltage 120 ~ 430 VDC
Maximum PV Array Open Circuit Voltage 500 VDC
Maximum Solar Charge Current 100 A 120 A
Maximum AC Charge Current 100 A 120 A
PHYSICAL
Dimension, (D x W x H) 140 x 295 x 468 mm
Net Weight 12 kg
Communication Interface RS232, USB, DRY CONTACT, Wi-Fi, RS485
ENVIRONMENT
Humidity 5% to 95% Relative Humidity (Non-condensing)
Operating Temperature -10°C to 50°C
Storage Temperature -15°C to 60°C
IP Degree of Protection IP21

Product specifications are subject to change without further notice.